Developing and Evaluation Metrics of 8 KWP Electricity Supply Berbera Area Photovoltaic by using Pvsyst Software

Abdirahman Ahmed Osman1

1

Publication Date: 2024/12/06

Abstract: Because of its dependability and effectiveness, grid-connected photovoltaic systems constitute the majority of the market for this technology. It is currently of utmost importance to have a system that can supply an adequate amount of power under ideal circumstances and deliver a considerable level of performance over time. This Photovoltaic array system that is connected to the grid is examined in the following study. It is planned to produce a nominal power of 8kWp at STC, and its design is simulated with PVsyst software. The study concentrates on important aspects such as system production, output power losses with a Sankey diagram, performance ratio (PR), and output energy of the system to be located, analyzing the output of PV modules, adjusting the field type, and sketching curves of power distribution and temperature distribution. system production, output power losses with a Sankey diagram, performance ratio (PR), and output energy of the system to be located. In addition to that, the findings of this study show how power is distributed during output and highlight how necessary it is to pay attention to module connections throughout the design phase of string construction.

Keywords: PVsyst, Tilt Angle, STC, Performance Ratio, Inverter, Berbera.

DOI: https://doi.org/10.5281/zenodo.14288130

PDF: https://ijirst.demo4.arinfotech.co/assets/upload/files/IJISRT24NOV275.pdf

REFERENCES

  1. Kumar BS, Sudhakar K (2015) Performance evaluation of 10 MW grid connected solar photovoltaic power plant in India. Energy Rep 1:184–192. https://doi.org/10.1016/J.EGYR.2015.10.001
  2. Zuhaib M, Khan HA, Rihan M (2021) Performance analysis of a utility-scale grid integrated solar farm considering physical and environmental factors. J Inst Eng Ser B. https://doi.org/10.1007/ s40031-020-00500-6
  3. Kumar NM, Kumar MR, Rejoice PR, Mathew M (2017) Perfor- mance analysis of 100 kWp grid connected Si-poly photovoltaic system using PVsyst simulation tool. Energy Procedia. https://doi. org/10.1016/j.egypro.2017.05.121
  4. Baqir M, Kaur HC (2022) Analysis and design of solar PV sys- tem using Pvsyst software. Mater Today: Proc. https://doi.org/10. 1016/j.matpr.2021.09.029
  5. Shrivastava A, Sharma R, Kumar Saxena M, Shanmugasundaram V, LalRinawa M, Ankit (2023) Solar energy capacity assessment and performance evaluation of a standalone PV system using PVSYST. Mater Today Proc. https://doi.org/10.1016/j.matpr.2021. 07.258