Publication Date: 2020/03/26
Abstract: Composite are new growth in material science industries mainly aircraft industries, material needed in low cost, less weight but should have high strength to increase the efficiency of aircrafts and also even in automobile industries. The solutions for above things are composite material only. This project gives the fabrication and investigation of mechanical properties of Carbon fibre with E-glass fibre and Chopped glass fibre reinforced with epoxy resin. In this process the fabrication is done by hand-layup method with random orientation of carbon, chopped glass and E-glass fibres. Further, Mechanical tests, such as Tensile test, Flexural test and corrosion test were performed on the sample, to study the mechanical properties of the composite. From the study it is observed that, Carbon fibre sandwich Composite is proved to be an effective composite with more corrosion resistant and also environment friendly, which can be used in the areas with greater exposure to sea water.
Keywords: Carbon Fibre Composite; Bending Test; Tensile Test; Corrosion.
DOI: No DOI Available
PDF: https://ijirst.demo4.arinfotech.co/assets/upload/files/IJISRT20FEB512.pdf
REFERENCES