Analysis of Mechanical and Microstructure Properties for FCAW Welded IS 2062 Steel Bead

Vikash Kumar; Subodh Kumar Yadav1

1

Publication Date: 2024/11/21

Abstract: Production rate and excellent metal deposition rate makes Flux cored arc welding (FCAW) unique among all welding process. The application of FCAW in field of structure joining of high strength allow steel is large. The base metal consists of two 150 × 150 × 16 mm thick steel plates of grade IS2062 E 350 are chosen for the study. The weld metals made by repeated pass FCAW process were submitted to tensile, bending and charpy-V examination. The metallographic examination for samples removed transversally to the weld bead. For the experiment, optimum parameters were chosen. From this study, the result showed that the mechanical and microstructural propertied of weld bead are superior than the base metal.

Keywords: FCAW, HAZ, IS2062, E350 Steel, Microstructure.

DOI: https://doi.org/10.38124/ijisrt/IJISRT24NOV842

PDF: https://ijirst.demo4.arinfotech.co/assets/upload/files/IJISRT24NOV842.pdf

REFERENCES

  1. T. Kannan and N. Murugan, Effect of Flux Cored Arc Welding Process Parameters on Duplex Stainless Steel Clad Quality, Journal of Materials Processing technology 176 (2006) 230-239.
  2. Mohamata, Syarul Asraf., Ibrahima, Izatul Aini., Amira, Amalina., Ghaliba, Abdul.: The Effect of Flux Core Arc Welding (FCAW) processes on different parameters. ProcediaEngineering42, 1497– 1501(2012).
  3. P.K. Palani, N. Murugan, Optimization of weld bead geometry for stainless steel claddings deposited by FCAW, Journal of Materials Processing Technology 190 (2007) 291–299.
  4. H.R. Ghazvinlo and A. Honarbakhsh, Effect of Gas-Shielded Flux Cored Arc Welding Parameters on Weld Width and Tensile Properties of Weld Metal in a Low Carbon Steel, Journal of Applied Science 10 (8): 658-663, 2010.
  5. P. Sathiya, S. Aravinda, P.M. Ajith, B. Arivazhagan and A. Noorul Haq, Microstructural Characteristics on Bead on Plate Welding of AISI 904 L Super Austenitic Stainless Steel Using Gas Metal Arc Welding Process, Engineering, Science and Technology, Vol.2, No.6, 2010, pp. 189-199.
  6. Erdal Karadeniz, Ugur Ozsarac and Ceyhan Yildiz, The Effect of Process Parameters on Penetration in Gas Metal Arc Welding Processes, Material and Design 28 (2007) 649-656.